HARRIS PYE to the rescue for damaged hull repair

Drill ships, Logistics, Marine Equipment Products and Services, News, Shiprepair, Technical, Technology — By on August 8, 2016 at 9:52 AM
Chris David

Chris David

Timing is all-important when repairs to a busy drillship are the order of the day. When Pacific International Drilling West Africa’s (PIDWAL) drillship Pacific Bora suffered damage to the starboard aft hull off the coast of Nigeria, PIDWAL called for assistance from the Harris Pye Engineering Group.

The repair was successfully evaluated; all necessary specialists and labour, steel, tools and equipment were mobilised; and the repair was made, installed, painted and tested in less than two weeks of the Harris Pye team boarding the Pacific Bora (“PBA”).

The Harris Pye team of one supervisor and three highly trained specialist tradesmen boarded the rig on 3 May offshore Nigeria, and sailed with it to the calm waters offshore Malabo, Equatorial Guinea where the work was successfully undertaken, and the Harris Pye crew disembarked on 16 May.

“We studied the repair scope, and put together a method statement to perform the repair work while the rig is afloat to avoid any dry docking and other cofferdam and divers cost, in order to bring the PBA back to 100 percent operability in under two weeks,” explains Chris David, Chief Technical Officer, of the global engineering group.

Damaged hull from inside the aft peak tank

Damaged hull from inside the aft peak tank

“PIDWAL had put together a task risk assessment for trimming the rig by forward, to maintain the dented portion 2.1m above water to enable us to proceed with the repair. They also provided all tools and consumables for the repair works, including the overhanging/ overboard scaffolding, so there were no delays due to customs holdups. The steel plate and rubbing bar for the repair were purchased by Harris Pye UK; and freight was handled by PIDWAL.

“Our scope of work gives an idea of just how exacting a project of this kind can be, and how vital it is to have a good working relationship with the client and their crew. We undertook to:

  • Crop and remove the damaged section of the shell plating
  • Prepare the edges in way of cut out for the installation of new plate
  • Prepare new plate and edge prepare it ready for installation
  • Install and weld prefabricated sections of shell/transom plating
  • Install and weld Ø60 half round bar
  • Perform welding according to Class-approved WPS (ABS Class)
  • Perform NDT by client-arranged third party
  • Apply touch-up paint
Shell plating after repair from inside aft peak tank

Shell plating after repair from inside aft peak tank

“All repair works were performed to the satisfaction of the attending ABS surveyor and Pacific Bora was ready to get back to work. We wish her and her crew success and would like to thank them for making our time aboard so productive.”

“PIDWAL has an array of registered in-country and overseas fabrication/welding vendors on the company’s vendor management system however with the repair scope and the possible risk involved in the hull repair, we had to scrutinize for a vendor that could deliver on time and on budget,” explains Adebo Oladipo, Assistant Rig Manager, Pacific Bora.

“We were sceptical initially because we weren’t sure of Harris Pye’s experience working off the coast of Nigeria however discussions with several PIDWAL employees that have had previous relationships with Harris Pye, instilled the needed confidence.

“I was impressed by the prompt response we received on queries, updates on personnel and equipment mobilization status and suggestions for optimization. The project was completed off the coast of Luba in an efficient manner and we commend the crew for a job well done.”

Further information on Harris Pye is available at www.harrispye.com
 
About Harris Pye

The Harris Pye Engineering Group is a rapidly expanding global organisation with active involvement in many key marine, oil and gas, offshore and industrial sectors. Operating worldwide on a 24/7 basis, its emphasis is on cost effective repair, preventative maintenance and conversion work.

Over the past 10 years, the Group has successfully developed a range of services to the offshore oil industry which include in situ repair, upgrade and conversion of rigs, semi-submersibles, trading tankers, FSU, FSO, FPSO and FSRU units. Harris Pye is a multi-cultural global service provider with a focus on supplying top quality products and fast and efficient customer service. Further information at www.harrispye.com

Tags: ,

Leave a Reply

IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)

What is 10 + 5 ?
Please leave these two fields as-is:

Trackbacks

Leave a Trackback